In the above, the small editor of the screw packaging machine manufacturer in the Middle East has explained the first half of the screw packaging machine in the application of the problem, and the next half will be shared with you.
Don't touch anything else.
6, adjust cylinder count
There are two cylinders on both sides of the straight vibration. The cylinder near the straight vibration is unadjustable, and the other is adjustable. The adjustable cylinder is set to the quantity of discharge. Set a few pieces of material and turn the cylinder behind the first few pieces. Test several times after adjustment.
When loading the cutter, we should pay attention to the following points:
First, take off the security cover and push the four screws on both sides forward.
2:Take off the two sides of the cutter and put the cutter on it.
3:After the knife is placed, align the two screws on both sides.
4: For the position, pull the two rings on both sides to the back of the front mold(distance 1-2 mm).
5: Place the cutter in the middle of the upper and lower parts of the front grinder, and then tighten the screw on the ring.
6:Press a dot on the panel to seal and try to tighten it.
The above content is Dongguan screw Packing Machine equipment manufacturers for the detailed introduction, more relevant information, please pay attention to liyou machinery official website news update in time. Liyou machinery equipment company is a company to survive quality, the company's conscience to produce a high quality ball grinder, quality, high quality service, trustworthy.
