How screw Packing Machine uses should be known, but in the application of the problem that appears in the process of how to deal with the problem have you known? Below Dongguan screw packing machine factory small compilation for everyone to sort out a material, hope can help everybody.
1, screw packaging machine during the running of the card material situation
When the cartridge suddenly stops during the operation of the Packer, press the emergency stop reset, and then press the start key. If it is still in a non-reactive state, this is the need to open the box door on the right side, pull the belt on the machine, and pull the die mouth. Pull to the maximum, Pull the stuck membrane or material out.
Then open the left box door, press the STOP/RESET key below the inverter, the value on the inverter screen is displayed as 0, and then close the door. The next step to the control panel part presses the emergency stop switch(press first, rotate to the right) to reset twice, and the machine returns to normal.
2, the molding device to be uniform, the left more to the left, the right more to the right, the center of the alignment.
3, if the vibration disk is in operation when the material can be solved by hand.
4,Do not pour too much screw material, half can be.
The above information is compiled by the supply company of Dongguan screw packing machine, unfinished to be continued. If you want to know more relevant information, please pay attention to Liyou Machinery official website. Liyou Machinery focuses on the development and production of electro-optic flower equipment, folding box machines, folding box machines, suction bubble shell Packers, screw packaging folding box machines, aircraft box folding box machines and so on.
