Do you know how to install and debug the
Packing Machine? I believe many of the small partners are not particularly good at, the following to see what Dongguan screw packaging factory small editor said.
Press the box switch to twist, the switch lock automatically bounces open the box door, the compressed air pipe is penetrated through the small hole under the back of the box, and then inserted into the air intake joint of the air pressure regulator valve behind the box door, and the pipe is clamped.
2 Close the box door and open the air source to open the air source switch input compressed air, the machine pressure plate automatically closed. According to the size of the package, the thickness and actual packaging of the plastic molding sheet material, the rotating pressure regulator handwheel will adjust the pressure to the appropriate pressure. The greater the pressure, the faster the pressure under the pressure plate, the greater the pressure, and it is generally appropriate to adjust to the atmospheric pressure of the cartridge.
3 Plug the machine wire into the 220V AC power socket, turn on the machine circuit, and connect the entire machine circuit.
4 The electric wood mold is placed on the mold table, and the wire on the mold is connected to the electric wood mold junction post in the middle of the machine mold table.
5 Turn on the cooling switch, turn on the cooling time circuit, adjust the cooling time when the press twist, choose the pressure plate cold pressure time.
6 The counterclockwise direction pushes the mold table to rotate to observe whether the pressure plate automatically presses the condition is normal. If there is no constant, the plastic drawing parts and wire cards can be objectively stored on the electric wood mold to start the test packaging.
7 Turn on the heating switch, turn on the heating time circuit, adjust the heating time to set the time twist, according to the actual packaging situation, choose the appropriate electric wood mold heating sheet heating.
8 The AOO thermoelectric current conversion system is used to adjust the heating sheet of the electric wood mold, thereby adjusting the current size. The user can choose the appropriate heating current file according to the actual packaging situation.
9 The user can adjust the function of each component device according to the test packaging situation until satisfactory.
The above is Dongguan screw packing machine equipment manufacturers small all the introduction, more relevant information, please pay attention to liyou machinery official website news update in time. Liyou Machinery focuses on the development and production of electro-optic flower equipment, folding box machines, folding box machines, suction bubble shell Packers, screw packaging folding box machines, aircraft box folding box machines and so on.
